Kohler K-19047 Guia De Instalacion página 4

Cutout
2. Install the Lavatory
CAUTION: Risk of personal injury or product damage.
Handle with care. Product can break, chip or cause injury if
handled carelessly. Get help lifting the lavatory.
Cut out the opening by carefully following the pencil line traced
from the template.
Temporarily position the lavatory in the countertop cutout so the
"Kohler" logo is to the back. Adjust to fit.
Remove the lavatory.
Drill the faucet holes.
Install the faucet and drain according to the manufacturer's
instructions.
Clean the countertop, and carefully position the lavatory in the
countertop opening so the "Kohler" logo is to the back.
Apply a thin, continuous bead of sealant around the lavatory
edges.
Immediately wipe away any excess sealant, and fill any voids as
needed.
Verify that the lavatory has not moved out of position.
Allow the sealant to cure at least 30 minutes before proceeding.
Connect and tighten the trap to the drain, and complete the water
supply connections to the faucet according to the instructions
packed with the faucet.
1052863-2-B
Countertop
Apply sealant.
4 Kohler Co.