BGS technic 2186 Manual De Instrucciones página 5

COMPONENTS
Name
5kΩ Potentiometer
LED Stroboscope
SRS Connector
Alligator Clip
Probe
Acicular Probe
1 to 2 Connector
1 to 1 Connector
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Picture Qty
2
2
2
2
2
4
2
4
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Discription
Many parts in vehicle are applied to the
variable resister (engine coolant temp,
sensor, air charge temp, sensor, oil
temp.). You can adjust the resister to
meet your demand.
2-color and 2-way LED. The LED
changes the color when shifting the
positive (+) / Negative (-).
While the SRS airbag or routed
contracting device of seat belt is bad or
after accident, it needs to set up a new
SRS airbag. The SRS connector is used
to replace thr SRS airbag to connect with
the system first. The connector will be
burned if the current is over 0.25A.
Clip the testing part, can be used
together with the probe and extended
line.
Probe the testing part, can be used
together with the alligator clip and
extended line.
(0.7mm) - black & red
To avoid the damage, please notice the
operating angle. (Good strength with
carbon steel)
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed