Function & Operation - KEKAI Slim Black Manual De Instrucciones

The heater must be installed at least 2.4M above the floor or grade
Attention: cable should not passing thought the heater
Caution:
When the appliance is not operated for a long period of time, cleaning or maintenance is conducted or when the location
of the heater is changed, the heater should be turned to OFF and unplugged from the electrical connection.
Periodic inspection and removal of dirt and contaminants will ensure that equipment can be operated safely.
FUNCTION & OPERATION
1.PLUG the unit into a plug socket, make sure the power supply is the same as rated
2.PRESS the power switch on the back side of heater, on and off the heater.
Troubleshooting
1. Check if the power cord is plugged into an electrical outlet, if not, plug in.
2. Check if electricity to the main fuse is working
3. Check if turn on the power switch on the back.
MAINTENANCE
Attention! Careful and regular maintenance of your heater considering our instructions assume great importance so as
to attain a long efficient operation of your appliance.
1.Check the filthiness of the Reflector and IR-Filament at least once a month. If necessary, apply cleaning and mainte-
nance instructions.
2.The number of checks may be increased considering the amount of the dust in the environment.
3. Check the deformation of the Reflector, Wire and Frame visually while cleaning the appliance. In case of deformation,
consult to your technical service.
4. Check the Power Cord and Plug visually while cleaning the appliance. In case of deformation, consult to your techni-
cal service.
CLEANIN
Regular and careful cleaning helps your infrared heater operate efficiently for many trouble free years. To clean your
heater follow steps below
1. Unplug the power cord for your safety before cleaning your appliance.
2. Make sure the heater is cool before continuing.
3. To keep the heater clean, the outer shell maybe cleaned with a soft, damp cloth. You may use a mild detergent if
necessary. After cleaning, dry the unit with a soft cloth. (CAUTION: DO NOT let liquids enter the heater).
4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean the heater. This may
cause damage or deterioration to the surface of the heater.
5. DO NOT immerse the heater in water
6. Wait until the heater is completely dry before use.
Storage: Store the heater in a cool, dry location when not in use to prevent dust and dirt build up. Use packaging carton
to store.
ATTENTION:
1. Always disconnect the heater from the electricity supply and allow it to cool before attempting to work on it.
2. If the heater has collected dust or dirt inside the unit or around the heating element, have to unit cleaned by a quali-
fied service agent. Do not operate the heater in this condition.
3. The only maintenance required is cleaning of the external surfaces of the heater.
4. Do not touch the heating element with bare fingers, as residue from your hand could affect the life of the lamp. If it is
accidentally touched, remove the finger marks with a soft cloth moistened with mentholated spirit or alcohol.
5. Do not attempt to repair or adjust any electrical or mechanical functions on this heater.