3 YEARS
L I M I T E D WA R R A N T Y
Always choose the undamaged anges with correct speci cations and shapes for your wheels.
The proper anges can reduce the risk of wheel breakage. The anges for cutting wheel might
be di erent from the anges for grinding wheels.
Do not use the left worn wheel from the big size power tools. The wheel for big size power
tools is not suitable for the small size power tools and may be broken during high-speed ope-
ration.
Ensure the wheel you use is complete without any damage. There should be no breakage by
hammering the wheel lightly with a wooden hammer. The valid date for the wheel should not
exceed one year unless it passes the running test and approves OK.
OPERATION
Observe correct mains voltage: The voltage of the power source must agree with the voltage
speci ed on the nameplate of the machine.
Subsidiary Handle
Please use subsidiary handle in order to do work safely and conveniently. Subsidiary handle
can be assembled on the both sides of the tool body (Picture One).
PICTURE 1
Protective Shield of the Emery Wheel Please aim the convex end of the emery wheel shield to
the slot mouth of the front cover, and then rotate the shield body to 180 degree (Picture Two).
6