Setting The Timer; Convenience Operation; I Sleep Mode Operation; I Powerful Mode Operation - Panasonic CS-E9BKP Manual Del Usuario

AUTO HEAT COOL DRY FAN
AUTO
AUTO
FAN
7
POWERFUL
MODE ECONOMY
AIR SWING
1 2
1
ON
5
OFF
TIMER
CHECK RESET CLOCK

SETTING THE TIMER

Ensure that the current time is correct before setting the
timer. The timer cannot be set if the time display is
flashing.
I ON-TIMER Operation
To start the air conditioner operation automatically.
• Press 1 to set the operation.
• Press 2 to increase or decrease the time.
• Then press 3.
• To cancel this operation, press 4.
I OFF-TIMER Operation
To stop the air conditioner operation automatically.
• Press 5 to set the operation.
• Press 2 to increase or decrease the time.
• Then press 3.
• To cancel this operation, press 4.
G Timer Mode Operation Details
• When the ON-Timer is set, operation will start
before the actual set time. This is to allow the room
temperature to reach the setting temperature by the
setting time. (Maximum of 35 minutes in advance).
• Once the timer is set, operation will start and stop
at the same time everyday.
• The current time is not displayed when the timers
are set.
• When both timers are used together, the TIMER
mode indicator on the indoor unit remains lit even
when the operation is stopped by the OFF-TIMER.
7
All manuals and user guides at all-guides.com

CONVENIENCE OPERATION

OFF/ON
Powerful and Sleep modes are available for Automatic
Operation, Heating, Cooling and Soft Dry.
SLEEP
6

I Sleep Mode Operation

To obtain a comfortable room temperature while sleeping:-
FAN SPEED
• Press 6.
3
3
• Sleep mode indicator on the indoor unit will light up.
SET
• To cancel this operation, press once more.
4
CANCEL
G Sleep Mode Operation Details
2
• When the room temperature reaches the set
temperature, the airflow volume will change to low,
automatically
• When used together with the timer, the timer has a
priority.
• Air blows out gently during sleep.
• For COOL/DRY operation.
Temperature
S
T
e e
m
t
p
t
e
i
r
n
a
g
t
u
r
e
• For HEAT operation
Temperature
S T
e
e
m
t
p
t
e
i
r
n
a
g
t
u
r
e
Maximum 1.0°C increase
Maximum 1.0°C increase
0.5°C increase
Temperature shift automatically
(max.1°C increased) is depend on
remote control set temperature
3.5°C
and outdoor air temperature.
increase
Sleep Shift
operation starts
Sleep Operation
button is pressed.
0~1 hour 2 hours 4 hours 3 hours
Approximately 10 hours operation
Sleep Operation
button is
pressed.
1.0°C
increase
4.0°C decrease
Sleep Shift
operation starts
0~1
hour 1 hour
5 hours 3 hours
Approximately 10 hours operation

I Powerful Mode Operation

To obtain the set temperature quickly.
• Used in winter to warm yourself quickly upon
returning home (Heating + Powerful).
• Used in summer to cool yourself after a hot bath
(Cooling + Powerful).
• Press 7.
* Powerful mode indicator (orange) on the indoor
unit will light up.
• To cancel this operation, press once more.
G Note
• The setting temperature and the fan speed changes
automatically in order to heat, cool or dehumidify the
room quickly.
• The Powerful and Sleep modes can be set during
Automatic Operation.
Operation Temperature
HEAT
3.5°C higher
2°C lower (For
Automatic COOL
first 20 minutes)
1°C lower (For
DRY
first 20 minutes)
Fan Speed
Slightly
Stronger