Creative Outlier Manual Del Usuario página 7

All manuals and user guides at all-guides.com
Press and hold both the Multifunction and "Next" buttons for
•
about 2 seconds to enable USB Mass Storage mode. Note: you
can toggle between USB Mass Storage and USB Audio modes by
repeating this step.
Clear or reset headset
• Press and hold the Volume Down "-" and Multifunction buttons for
more than 6 seconds to clear the paired Bluetooth devices
If the headset malfunctions, reset it by supplying USB power, then
•
press the Volume Up "+" and Multifunction buttons for about 2
seconds
Automatic shutdown
• Once the headset is powered on, if it is unable to connect to the
last paired device or failed to pair with a new device within 5
minutes, the headset will automatically shut down.
List of button, indicator and connector / port functions
Button
1.
Power: Press and hold for 2 seconds to
Multifunction
power on the headset. Press and hold for
(Power / Pair /
3 seconds to power off the headset.
Call and Play /
Pause)
Pair: In off mode, press and hold for more
than 5 seconds to activate Pairing mode.
Function
Call: Press and release to answer or
end an incoming call*. Press and hold
for 2 seconds to reject a call during an
incoming call*. Press twice to accept a call
waiting and put on hold the ongoing call.
* Applicable in Bluetooth , microSD Audio
and USB Audio modes.
Music playback: Press to play. Press
again to pause playback.
2.
Press '+' to increase or press '-' to
Volume Up /
decrease volume. 15 incremental Steps
Volume Down
are available. A beep tone is emitted at
minimum level and two beep tones at
/
maximum level. Press for 1 second and
release both '+' and '-' to mute or unmute
the microphone during a call.
Volume operations in microSD Audio mode
complying with European Directives:
To protect your hearing, you will hear 5
warning beeping tones when you attempt
to increase the volume level above Step
10 for the first time. You can cancel this
tone by pressing '+' button. Thereafter, you
may proceed to increase the volume level
with caution. Note that at this increased
volume level, a repeat of this warning tone
will occur for every 18 cumulative hours of
use. When this happens, the volume level
will be reduced to the default Step 9.