Emmaljunga NXT60 Manual Del Usuario página 12

Usage of the Adapter
1.
1
2
2.
3
3.
4.
5
5.
7
12
Attaching the car seat adapter on to the chassis
• Engage the brake
• Remove the carry-cot or seat-unit in accordance with the pram manual
• Attach the adaptor onto the chassis by pushing the adapter into the Easy
Fix locking mechanism (1).
• The adapter should be turned so that the plastic ring (2) points towards the
handle of the pram.
WARNING!
• Make sure that the adapter is attached into both locking mechanisms of
the chassis.
• Never lift the carseat when it is assembled onto the chassis.
• Always engage the brake when you attach the adapter onto the chassis.
Click the car seat onto the adapter
• Hold the car seat by the handle and assemble it onto the adapter (3) so
that the foot end of the car seat is facing the handle of the pram.
• Click in the car seat into the adapter by pressing it straight down into the
adapter until you hear a clicking sound. Make sure that the car seat clicks
in properly into the adapters two attachment points.
• Hold the car seat at all times by the carrying handle. Do not release your
grip until you have secured the car seat into position.
Now the car seat is in place onto the adapter.
WARNING!
• The foot end on the car seat must always be the same way as the handle
of the pram (facing the handle).
• The adapter may only be used with the car seat in an upright position if
the baby car seat offers several sitting / lying positions.
Remove the car seat from the adapter
• Engage the brake
6
• Press the button on the car seat (5) and lift the car seat straight up (6).
WARNING!
• Always engage the brake before you attach and detach the car seat.
Release the adapter from the chassis
• Release the adapter from the chassis by pulling the plastic rings (7) which
are located on the outside of the adapter
• Pull the adapter up from the chassis
IMPORTANT!
• Before you fold the chassis in accordance with the instructions of the pram
manual, you must remove the car seat. You do not need to remove the
adaptor before you fold the chassis.
Carseat Adapter - NXT60/NXT90/NXT TWIN - v.2.1