MZ electronic EV-020 Instrucciones De Uso página 44

Current calibration menu
To obtain this function connect the current sensor (optional)
Use the (DOWN) or
Current Sensor
This function enables or disables the
current sensor if it is present.
The current sensor is supplied as an
optional and it is not included in the
basic package.
Wire Diameter
In this row the User must enter the
diameter (in centimetres) or the cable
(including the coating) measured with
precision).
Settable values: 0.01 - 0.02 -
0.03...6.00 (cm).
Exit
To return to the settings menu.
EV-020
(UP) key to move around the parameters.
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Confirm with
44
English
Rev. 04 – 2007