Installation Options - Manhattan 180535 Guia De Inicio Rapido

For specifications, please visit manhattanproducts.com. Register your product at register.
manhattanproducts.com/r/180535 or scan the QR code on the cover.
Setup
1 Unlock unit door and open it.
2 To fit larger devices, remove bay divider(s).
• Unscrew bar and set it aside.
• To remove divider, pull up on the clip to release it from the bar it's attached to.
• When enough dividers are removed, replace numbered bar and screws.
3 Connect devices to power outlets with appropriate cables. Secure cables with wire clips on dividers.
• Remove screws that hold the power box in place; slide the power box out.
• Connect power cables to power outlets, feeding cables through holes on power panel.
• Push the power box back in and replace the screws that hold it in place.
• Load devices in bays.
• Connect cables to devices.
Charging
4 Connect unit power cable to power outlet. Unit automatically begins to charge devices.

Installation Options

The following sections offer optional steps to complete installation.
To Reverse the Door — NOTE: Make sure all power is cut off from unit!
1 Unscrew grounding cable from door and cabinet.
2
English
1
2 Remove door from cabinet by pulling L-shaped pins.
3
Instructions