TFA TIME BLOCK Instrucciones Para El Manejo página 6

TFA_No. 98.1082_Anleit_03_20 13.03.2020
TIME BLOCK
– Digital alarm clock
• Keep the unit out of reach of persons (including children) who cannot fully appreciate the
potential risks of handling electrical equipment.
• Pull the plug out of the socket immediately if any fault occurs or if the unit is not used for a
lengthy period.
• Only use the supplied mains adapter.
• Do not pull the plug out of the socket by its lead.
• Route the mains lead so that it does not come into contact with sharp-edged or hot objects.
Caution!
Risk of injury:
• Keep this instrument and the battery out of reach of children.
• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed,
this can lead to serious internal burns and death within two hours. If you suspect a battery
could have been swallowed or otherwise caught in the body, seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explo-
sion!
• Low batteries should be changed as soon as possible to prevent damage caused by leaking.
• Wear chemical-resistant protective gloves and glasses when handling leaked batteries.
Important information on product safety!
• Do not place the unit near extreme temperatures, vibrations or shocks.
• Do not place any objects on the instrument.
5. Elements and buttons
(1) PM indicator
(3) SNOOZE button
(5) ALARM ON/OFF switch
(7) MODE button
(9) DOWN button
(11) DC Jack
(13) Button cell compartment
6. Getting started
• Open the battery compartment (13) and remove the insulation strip.
• Insert the adapter into the jack (11). Connect the power adapter to a wall socket. Important!
Make sure that your household voltage is 240V! Otherwise your clock may be damaged.
• 12:00 and PM appear on the display.
10
10:51 Uhr Seite 6
(2) Alarm indicator
(4) FUNCTION switch
(6) Brightness adjusting switch
(8) UP button
(10) RESET hole
(12) CR2032 button cell (included)
(14) Button cell compartment cover
TIME BLOCK
– Digital alarm clock
6.1 12/24 hours indication
• In normal mode, press DOWN button (9) to select 12 (PM appears on the display after
12 h) or 24 hour mode.
6.2 Setting of the clock and date
• Move the FUNCTION switch (4) to 'T.SET' (TIME SET), hour part is blinking; press UP button (8)
or DOWN button (9) to set the hour. (Be careful to set AM or PM correctly. When the PM time is
set under 12-hour mode, a PM indicator (1) is lightened.)
• Press MODE button (7), minute part is blinking, press UP button (8) or DOWN button (9) to set
the minute.
• Press MODE button (7), only second part is blinking, press UP button (8) or DOWN button (9)
to return to '00' second. This step is to ensure setting the clock accurately.
• Press MODE button (7), the display of 4 numbers is blinking, it stands for year (the initial year is
2006); press UP button (8) or DOWN button (9) to set the year (from 2000-2099).
• Press MODE button (7), month part is blinking, press UP button (8) or DOWN button (9) to set
the month.
• Press MODE button (7), day part is blinking, press UP button (8) or DOWN button (9) to set the
date.
• Move the FUNCTION switch (4) to 'NORMAL', the time and calendar settings are finished.
6.3 Setting of the alarm time
• Move the FUNCTION switch (4) to AL.SET (ALARM SET), hour part is blinking, press UP button
(8) or DOWN button (9) to set the alarm hour.
• Press MODE button (7), minute part is blinking; press UP button (8) or DOWN button (9) to set
the alarm minute.
• Press MODE button (7) again, the snooze interval minute part is blinking; here you can set
snooze interval from 1 minute to 60 minutes by pressing UP button (8) or DOWN button (9).
You can ignore this step, the default snooze interval is 5 minutes.
• Move the FUNCTION switch (3) to 'NORMAL'. The snooze alarm setting is finished.
6.4 Activate/turn off Alarm ON/OFF
• Move the ALARM ON/OFF switch (5) to AL.ON (ALARM ON), the Alarm indicator (2) appears.
That means the snooze alarm function is activated. When the set alarm time is up, the alarm
sound starts.
a) Press SNOOZE button (3), the clock will stop alarm temporarily; the alarm sound will start
again after the snooze interval ends. After doing so four times repeatedly, the snooze alarm
function will stop working.
b) If there is no man-made stop, the clock will alarm lasting 1 minute every snooze interval,
four times totally. After that, the snooze alarm function stops working.
c) Move the ALARM ON/OFF switch (5) to 'AL.OFF' (ALARM OFF), the snooze alarm function
will stop working permanently.
11