Uline H-2506 Manual De Instrucciones página 3

6. Turn stool upright. Slide backrest onto mounting post.
The slot on backrest must align with hole at top of
mounting post. Set backrest at preferred height and
fasten bolt with washer (4) through slot and into post
to secure. (See Figure 5)
CAUTION! Ensure all screws are tightened
securely before use. Check screws
periodically – failure to keep all screws
fastened securely may lead to injury.
1. Backrest Height – To adjust backrest height, loosen
bolt and slide backrest up or down. Set backrest at
preferred height and tighten bolt to secure.
2. Seat Depth – To adjust seat depth, loosen knob and
slide the backrest in or out. Set backrest at preferred
seat depth and tighten knob to secure.
PAGE 3 OF 9
BACKREST ASSEMBLY CONTINUED
BACKREST ADJUSTMENTS
1-800-295-5510
uline.com
Figure 5
1
2
0521 IH-2506