Maintenance - Dogtra YS VIBE Manual Del Usuario

Charger Info
Manufacturer : HON-KWANG
Manufacturing country : CHINA
Model name : HK-AP-050A100-EU
INPUT : 100~240V~50/60Hz 0.2A
OUTPUT : 5V 1.0A
WARNING
During battery charging, the unit must be close to the
wall outlet and the wall outlet must be easily accessible
for security reasons.
32

MAINTENANCE

Basic Maintenance
Be sure the rubber charging cap is securely in place when
the collar is in use. After each training session, carefully
inspect the unit for any missing parts or damage to the
casing. Damaged or broken casing may affect the
waterproof guarantee on the unit. After confirming that
there is no damage to the casing, rinse the receiver and
clean out any dirt or debris.
Storage Maintenance
The YS VIBE should be fully charged before storing for
extended periods. While in storage, the unit should be
given a full charge once a month and before the first use.
Store the units in room temperature. Do not keep the units
exposed to extreme climates.
Troubleshooting
If the unit is malfunctioning, please refer to the
"Troubleshooting Guide" before sending it to Dogtra for
service. If you have any questions or concerns, you may
email them to info@dogtra-europe.com, or call customer
service at +33 (0)1 30 62 65 65.
33