Assembly And Usage - Joovy Caboose S Manual Del Usuario

Assembly and Usage

• To use the car seat adapter in the front position, first ensure the front
seat is removed.
• Line up the male brackets on the bottom of the car seat adapter with
the female brackets on the stroller frame. (1) Make sure the arrow
mark on the adapter faces backward.
• Push down on each side of the car seat adapter until both brackets
click into place. (2) Pull up the car seat adapter on both sides to
ensure it is secured.
• The car seat can only face backward.
• Hold the car seat by the carry handle and lower the car seat onto the
stroller so that the bracket on the car seat latches onto the car seat
adapter. Pull up on car seat to ensure it is secure.
• To remove the car seat, pull the release lever (the same lever used to
release the car seat from its base) and lift up. (3)
• To remove the car seat adapter from the stroller, push the trigger on
each adapter and pull it up off the stroller. (4)
• To use the car seat adapter in the rear position, ensure the front seat
is fully upright.
• Line up the male brackets on the bottom of the car seat adapter with
the female brackets on the stroller frame. (5) Make sure the arrow
mark on the adapter faces backward.
• Push down on each side of the infant car seat adapter until both
brackets click into place. (6) Pull up on the infant car seat adapter on
both sides to ensure it is secured.
• The car seat can only face backward.
• Hold the car seat by the carry handle and lower the car seat onto the
stroller so that the hook on the rear of the car seat latches onto the
car seat adapter. Pull up on car seat to ensure it is secure.
• To remove the car seat, pull the release lever (the same lever used to
release the car seat from its base) and lift up. (3)
5