Ribimex Ribiland PR4EN1T Manual De Instrucciones página 38

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

All manuals and user guides at all-guides.com
8. Dress properly
Do not wear loose clothing or jewellery; they can be caught in moving parts.
Wear protecting hair covering to contain long hair.
9. Use protective equipment
Wear protective equipment appropriate to working conditions and work environment
Wear protective helmet, safety goggles, ear mufflers, face or dust mask or breathing mask with
proper filter, rubber gloves and non-skid footwear to reduce the risk of personal injury during
products use or manipulation.
10. Do not overreach
Keep proper footing and balance at all times.
Do not work on unsecured scaffolding, ladders...
11. Maintain product with care
Keep product clean for better and safer performance.
Follow instructions for lubrication and changing accessories.
Keep handles dry, clean and free from oil and grease.
Ensure that ventilation slots are kept clean and free from dust at all times (to avoid product from
overheating)
12. Switch off product when not in use, before servicing and when changing accessories.
13. Remove adjusting keys and wrenches
Form the habit of checking to see that keys and adjusting wrenches are removed from the product
before starting it.
14. Avoid unintentional starting
Do not carry a running product with a finger on the switch.
Ensure switch is off before starting.
15. Stay alert
Watch what you are doing. Use common sense.
Never operate this machine or other power equipment if you are tired, ill, or under the influence of
alcohol, drugs, or any other substance that could affect your ability of judgment.
16. Check damaged parts
Before further use or reuse of the product, it should be carefully checked to determine that it will
operate properly and perform its intended function.
Check for alignment of moving parts, free running of moving parts, breakage of parts, mounting and
any other conditions that may affect its operation.
Should product bump into a hard object (e.g. fence, stone...), immediately stop engine and carefully
check product for any damage, and have it repaired if necessary, by qualified service centre.
17. Defective switches or other part that is damaged should be properly repaired or replaced by an
authorized service centre. Do not use the product if the switch does not turn it on and off.
18. Warning
The use of any accessory or attachment, other than those recommended in this instruction manual,
may present a risk of injury to persons or animals and may cause damages.
The user and/or operator are responsible for any damages or injury caused to properties and/or
persons.
19. Have your product repaired by qualified personnel
Unless otherwise indicated in this instruction manual, repairs or replacement of any damaged part in
an authorised service centre is recommended.
This product is in accordance with the relevant safety requirements. Repairs should only be carried
out by qualified persons using original spare parts; otherwise this may result in considerable danger
to the user.
20. Remarks:
The safety precautions and instructions given in this manual are unable to cover in detail all the
conditions and situations that may arise.
The operator and/or user must use common sense and caution when operating the product especially

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

515371

Tabla de contenido