B.Braun Aesculap Instrucciones De Manejo página 16

Replacing the blade set
The blade set is subject to wear. Even if you look after the
appliance properly, the cutting performance will deteri-
orate. Replace the blade set when it is worn. The blade
set can be ordered separately as a spare part from
Aesculap Customer Service (see addresses at the end of
these instructions).
Damage to casing when screwing on
clipper head!
Do not over tighten the screw.
WARNING
16
All manuals and user guides at all-guides.com
Make sure the On/Off switch 4
is in the 0 position.
Remove the Allen key 13 from
the base of the charging unit
and use it to loosen the blade
set screw 6.
Loosen the screw fully and re-
move it.
Push the blade set upwards with
your thumb.
Push the new blade set on until
it snaps into place and secure it
using the screw.