While the blade set is removed, you can use the
cleaning brush to remove residual hair from inside the
appliance.
Cleaning the appliance
Clean your appliance occasionally with a damp cloth,
then wipe it dry.
Cleaning the charging contacts
If the charging contacts 7 on the appliance or the charg-
ing contacts 3 on the charging unit are dirty, charging
may not be possible or may be interrupted.
Clean the contacts using a cloth or wad of cotton
wool soaked in alcohol or spirit.
Care of the NiMH rechargeable battery
To maintain the charging capacity of the battery we rec-
ommend occasionally draining the battery until the mo-
tor stops.
All manuals and user guides at all-guides.com
If the battery is run down (motor stops), be sure to
switch the On/Off switch to 0 and place the appliance
in the charging unit.
Make sure you do not leave the appliance switched
on when putting it aside if the battery is run down.
Make sure the appliance is switched off (On/ Off
switch to 0) when you place it in the charging unit.
6. What should I do if ...
... the appliance will not switch on?
Is the battery low? Plug in the mains adapter for the
charging unit and charge the trimmer.
Is the blade set dry? The blade set must be oiled. Pro-
ceed as described on page 15.
... the blade set "sticks"?
The blade set must be oiled. Proceed as described on
page 15.
17