Publicidad
Idiomas disponibles
Idiomas disponibles
Aluminum Sleeve with Steel Core, Inner-Ø 80 mm
CONTENT
1 Aluminum Sleeve,
with Steel Core
1 Grinding Wheel
INTENDED USE
These wheel hub grinder is used to remove corrosion residues on wheel hubs without stud bolts.
SPECIFICATIONS
1/2" inner square drive, suitable for all 1/2" impact wrenches
SAFETY ADVICE
•
Remove all parts of the set from the packaging and check them for damage.
•
Do not use the product when it is damaged.
•
Keep packaging materials and the wheel hub grinder out of reach of children, the set and
packaging materials are not toys.
•
Before use, make sure that the grinding wheel rests correctly on the retaining sleeve surface.
•
Avoid touching moving parts, there is a risk of injury!
•
When using, always wear personal protective clothing, such as safety glasses, protective gloves,
ear protection and respiratory protection.
USING
Use the wheel hub grinder in conjunction with an impact wrench.
1. Attach the grinding wheel centered on the hook and loop tape of the aluminum sleeve.
2. Connect the wheel hub grinder with an 1/2" impact wrench.
3. Switch on the impact wrench and grind the hub surface under slight pressure until it is free from
corrosion.
WEAR MATERIAL
Wear materials can be ordered under the following BGS numbers:
BGS 9747 - Grinding Wheel Set, 3 pcs.
BGS 9748 - Hook and Loop Tape, 2 pcs.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Wheel Hub Grinder,
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Art. 9746
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
