Technical Data - Trevi ME 3P80 RC Manual Del Usuario

ME 3P80 RC
SETTING THE TEMPERATURE AND CHECKING THE MAX/ MIN TEMPERATURE AND HUNIDITY
To switch the temperature measurement between Celsius and Fahrenheit, press the UP button (20) which is also the C/F
option button. You can switch between Celsius and Fahrenheit at any time (except when setting other setting options).
Minimum/ Maximum values of the day:
- Press the MEM button (18) to check MAX/ MIN temperature and humidity;
- Press and hold the MEM button (18) to clear the record of MAX/MIN temperature and humidity when display shows
MAX or MIN temperature and humidity.
ADJUSTMENT OF THE BACKLIGHT
When the display unit is powered by battery only the back light will be off to preserve the battery. Press the SNZ/ LIGHT
button (15) to turn the back light on for 8 seconds.

TECHNICAL DATA

Weather station: ............................................................................... from -10° C to +50° C
Internal humidity: .............................................................................. from 1% to 99%
External sensor: ............................................................................... from -40° C to +70° C
Channels: ............................................................................... max. 3 external sensors
Radio control signal reception: .......................................................... 77.5 KHz
Transmission: ............................................................................... 30m, RF 433MHz, 10mW
Unit feed rate: ............................................................................... 0,1° C for temperature - 1% for humidity
Main unit power supply: .................................................................... 3xAAA batteries (not supplied)
External sensor power supply: ........................................................... 2xAAA batteries (not supplied) for each sensor
9
English