Intended Use; Installation And Connection - Pontec PondoRell 3000 UVC Instrucciones De Uso

Product Description
Overview
 A PondoRell 3000 UVC / 5000 UVC
1 Filter housing with filter pump and UVC clarifying unit
2 Ball joint with adjustable outlet (∅ 9 mm)
3 Telescopic pipe, 2-part, consisting of an external and an internal pipe
4 Stepped hose adapter, 12 mm, 19 mm, 25 mm
5 Flat seal for ball joint (2) or stepped hose adapter (4)
6 Nozzles
Properties
PondoRell 3000 UVC / 5000 UVC is a fountain pump with a filter function for garden ponds and prefabricated basins.
• Compact filter unit with UVC technology and 4 different filter materials.
• Different nozzles for attractive fountains.
• Telescopic pipe for adapting the nozzle to the pond surface.
• Separately adjustable outlet for operating waterspouts or small water courses.
• Individual adjustment of water volume and fountain height.
• Installation completely under water – no unwelcome disruptions of the pond appearance.
• Visual function check of the UVC clarifying unit.

Intended use

Only use the product described in this manual as follows:
• For cleaning garden ponds.
• For operation with clean water.
• Operate the product in compliance with the technical data. (→ Technical data)
The following restrictions apply to the unit:
• This product is not suitable for general lighting, but is only intended for the purpose described here.
• Do not use in swimming ponds.
• Never use the unit with fluids other than water.
• Never run the unit without water.
• Do not use for commercial or industrial purposes.
• Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.

Installation and connection

Use as a fountain pump
How to proceed:
 B, C
1. Assemble the telescopic pipe.
– Insert the internal pipe into the external pipe and secure with the retaining collar.
2. Fit the telescopic pipe onto the ball joint.
– Ensure that the control valve on the telescopic pipe and the separately adjustable outlet on the ball joint are
aligned opposite each other so that water can flow out of the outlet of the ball joint.
3. Insert the desired nozzle into the telescopic pipe and screw it in.
– Some nozzles have to be turned to adjust the shape of the fountain.
4. Screw the ball joint onto the pump outlet and hand-tighten.
5. Vertically align the telescopic pipe via the ball joint.
6. Place the unit in the pond on horizontal, firm and sludge-free ground and ensure that it is completely covered by wa-
ter.

The separately adjustable outlet (∅ 9 mm) on the ball joint can be used for feeding an optional water course.
- EN -
Quantity
1
1
1
1
1
4
17