Main Unit Bottom/Side/Top - JVC TK-C205VP Instrucciones

Names and Operations of Parts

Main unit bottom/side/top

1 Safety cable installation screw
Install the safety cable using this screw.
(Safety cable not included.)
CAUTION
To avoid unforeseen accidents, attach a
safety cable. Otherwise, there is nothing
to prevent the camera from falling should
it come loose.
Mounting holes (for mounting to the
2
electrical box)
When using a 4 inch square electrical
box, the 2 holes are used to fix the box
in place.
CAUTION
Use screw size suitable for the mounting
holes (ø5mm ( 3 /
16
Mounting holes (for mounting to the
3
ceiling)
These holes are used to mount the
camera body to the ceiling.
E-8
bottom
")).
side
Use screw size suitable for the mounting
holes (ø5mm (
4 Conduit hole
Hole for installation to conduit hole pipe
and wiring.
Conduit plug & hole (side)
5
When the unit cannot be installed to the
ceiling, the pipe is mounted to this hole
for wiring.
Tamper-resistant screws
6
Tamper-resistant screws for fixing the
dome cover to the base.
Use the provided wrench to install/
remove the Tamper-resistant screws.
top
CAUTION
3
/ ")).
16