Using The Hand-Held Temperature Controller - Bair Paws 875 Manual Del Operador

6� To disconnect the hose nozzle from the warming
gown, press the two buttons on the sides of the nozzle
and withdraw the nozzle from the hose port�
7� Store the warming unit hose by inserting it into the
hose holder at top of unit�

Using the Hand-held Temperature Controller

After the hose has been connected to the Bair Paws gown, the patient can adjust the air
temperature and airflow by turning the knob on the temperature controller� The following
list explains how the unit will operate when the knob is placed in the specified position
shown in the figure�
When the knob is in position A, the warming unit is
•
As the knob is rotated from position A to B, the knob clicks and the warming unit
•
turns on LOW AIRFLOW and LOW HEAT�
By turning the knob from position B to C, the air temperature increases from slightly
•
above room temperature to approximately 41˚C (106˚F), while the blower remains
on LOW AIRFLOW�
As the knob rotates
•
clockwise past position
C, the blower's airflow
increases�
At position D, the
•
warming unit is on
HIGH HEAT and
HIGH AIRFLOW�
The air temperature
will stabilize at 43±3˚C
(109±5�4˚F)�
8
Hose holder
Warming
unit hose
OFF�
Bair Paws® Model 875 Warming Unit Operator's Manual