English - Logitech QuickCam Ultra Vision Manual Del Usuario

Logitech ® QuickCam ® Ultra Vision User's Guide
2
Install the Software First
Install the software before plugging in your camera.
Note Many of your camera's features require
the software to be installed for proper
operation.
3
Connect Your Camera
to Your Computer
Wait until prompted by the software, and then connect your camera to an available USB port
on your computer.
 English
All manuals and user guides at all-guides.com
Logitech
4
Your camera comes with Logitech
The following steps will ensure the best possible audio performance:
Tip
5
The first time that you start QuickCam
and Audio Tuning Wizard that lets you do the following:
Tip
® QuickCam ® Ultra Vision User's Guide
Position Your Camera, Microphone,
and Speakers
® RightSound ™ echo-cancellation technology.
1. Position your camera in the middle of your monitor for optimal
eye contact.
2. Position your camera's microphone no more than 3 feet (1 m)
away from you and point it toward you.
3. Position your speakers (if used) at least 12 inches (30 cm) away from
your microphone to reduce feedback, and then angle your speakers away
from your microphone.
Do not place objects between you and the microphone.
The Audio Tuning Wizard
®
, you are guided through the Microphone/Speaker Setup Utility
• Select the audio input device (microphone)
and audio output device (speakers).
• Enable Acoustic Echo Cancellation (AEC)—
recommended.
• Specify mic rophone input volume and speaker
output volume.
• Test audio settings.
To change these settings later, in the QuickCam
software, click the Settings button and then
click the Audio tab.
®
English