Installation; Motion Sensitivity; Service - Bosch VSS8394/01 T Manual De Instrucciones

VSS8394/01T Multiplexer | Installation Manual | Chapter 2
FLICKERLESS This option is available with certain
camera versions. It reduces the
flicker produced by artificial lights.
WHITE White balance is used only for color
cameras. The camera automatically
BALANCE
matches the video color to the
white (reference) area of the image.
The different options are:
FIXED - keep the white balance
settings which are currently used.
AUTO - White balance is automati-
cally set.
RECALCULATE - Set the white
balance to automatic for 5 seconds
and then back to fixed.
Note
Recalculate is only available when
current setting is FIXED. This
function is disabled when a black
and white camera is used.
FIELD OF (Range 1: 1.33: 1.66 : 2: default is
1). Adjust the field of view using
VIEW
digital zoom in the camera to
ensure complete coverage of the
object within the viewing angle of
the camera lens.
MICRO- Select the microphone ON/OFF.
This function will be disabled when
PHONE
cameras are connected without a
microphone (e.g., covert cameras).
MOTION Allows you to define the area size
for motion detection.
AREA
MOTION Allows you to define the sensitivity
of motion detection.
SENSITIVITY
This enables you to detect objects
like a person running across the
motion area but will not raise an
alarm if there is a small movement
(detect humans but no birds).
DISPLAY This allows you to view where the
motion has been detected by dis-
MOTION
playing a series of movement indi-
cators on the monitor screen.
Bosch Security Systems | 2003-06
All manuals and user guides at all-guides.com

2.4.9 Motion Sensitivity

MAIN MENU
SYSTEM SETTINGS
INST ALLATION
SETUP C A MERA 1
MOT ION S ENSIT I VIT Y 1
L E V E L
MOTION INDICATOR
RESET INDICATOR
LEVEL
MOTION
INDICATOR
RESET
INDICATOR
Set motion alarm as follows:
1 Reset indicator.
2 Set level on minimum.
3 Walk through motion area (motion indicator indi-
4 Set level just below the level of motion indication.

2.4.10 Service

The SERVICE menu contains all items relevant for
servicing your observation system: resetting the system
to factory defaults and the internal diagnose.
MAIN MENU
SYSTEM SETTINGS
S ERV ICE
SYSTEM DIAGNOSE
FACTOR Y DEFAULTS
SYSTEM
DIAGNOSE
FACTORY
DEFAULTS
Sets the level (the amount) of
motion detection.
Displays the set level of motion
detection.
Resets the motion detection indica-
tor to the current setting.
cates level of motion).
With this option you can obtain an
overview of the internal diagnose
settings. (Consult the service man-
ual for more information).
With this option you can set the
complete system to the factory
defaults. All current settings will be
lost, (this will take a few seconds).
Language selector and Wizard
setup will be activated again.
EN | 11