VALBERG WF 814 S566C Instrucciones De Uso página 6

B
Using the appliance
Operation
Quick Start
CAUTION!
• Before washing, please make sure the washing machine
is installed properly.
• Your appliance was thoroughly checked before it left the
factory. To remove any residual water and neutralise
potential odours, it's recommended that you clean your
appliance before first use. For this reason, start the Cotton
programme at 90°C without laundry or detergent.
CALIBRATION
It's recommended that you calibrate the washing
machine to provide the best performance. The
appliance can detect the amount of laundry loaded.
This function optimises product performance by minimising
energy and water consumption, saving you money and time.
For this reason, it's recommended that you calibrate the
appliance for best use.
ΠRemove all accessories from the drum and close the
door;
 Insert the mains plug in the socket;
Ž Switch on the washing machine and press "Delay" and
"Temp." simultaneously for 10 seconds until "t19" is
displayed;
 Press [ ] to start the appliance and wait until "****" is
displayed.
8 EN
B
Using the appliance
1
Before Washing
1 2
ΠPlug in
 Open tap
Ž Load
 Close door
 Add detergent
NOTE
Detergent needs to be added in compartment I if the pre-
wash function is selected.
2
Washing
1 2
ΠPower On
 Select programme
Ž Select function or retain default settings
 Press Start/Pause to start the programme
3 4
3
9 EN
5
4