Ac/Dc Voltage Measurement; Resistance Measurement - BGS technic 2203 Manual De Instrucciones

5.2 AC/DC Voltage Measurement

1. Connect the black test lead to the COM jack and the red test lead to the V jack.
2. Set the range switch to AC600V or DC600V.
3. Touch the tips of the test leads to the circuit under test.
4. Read the display.

5.3 Resistance Measurement

1. Connect the black test lead to the COM jack and the red test lead to the VΩ jack.
2. Set the rotary switch at desired Ω position and test leads across the resistor under measurement.
NOTE:
1. If the resistance being measured exceeds the maximum value of the range selected or the input
connected, an over range indication "1" will be displayed.
2. When checking in – circuit resistance, be sure circuit under test has all power removed and that all
capacitors have been discharged fully.
5.4 How to Use Date Hold Function
On all ranges, you can hold a reading on the display using Date Hold Function.
1. While making measurement, press the Date Hold switch. The last reading remains held on the display,
with a Hold symbol shown Date Hold Function.
2. Press the Date Hold switch again to exit from Date Hold Function.
6.1
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycling centre and disposed of in a manner which is
compatible with the environment
6.2
DISPOSAL
Do not dispose battery in household waste. Batteries should be disposed of in a responsible
manner, they must be disposed at appropriate collection point. Dispose of this product at the end
of its working life in compliance with the EU Directive on Waste Electrical and Electronic
Equipment. Contact your local solid waste authority for recycling information or give the product
for disposal to BGS technic KG or to an electrical appliances retailer
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
.
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
.
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed