IARP CORAL 118 Manual Del Usuario página 16

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
16. MALFUNCTION AND REMEDIES
Check that there is voltage at the wall socket.
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
LA TEMPERATURA INTERNA NON È SUFFICIENTEMENTE BASSA
External environment may require a higher setting.
The door is opened too often.
Check door is perfectly closed.
The door gasket does not seal properly.
The room temperature is hotter than normal.
Make sure that the cabinet has been filled correctly.
The door is opened too often.
Check door is perfectly closed.
The temperature control is not set correctly.
The door gasket does not seal properly.
In order to circulate the air and maintain the set temperature inside the cabinet the fans must cycle on and off even when the compressor is off. The
fans will cycle ON and OFF while the compressor is off approximately every 10 seconds, this is called "Semi-speed status". This cycle is normal and
meant both to circulate the air as well as ensure the continued operational status of the fans. If the fan stops completely and does not complete this
cycle the fan is non-operational.
Check that there is voltage at the wall socket.
The circuit breaker tripped or a blown fuse.
The light button is "OFF".
Check that the unit is placed on an even surface.
The bottles are vibrating.
There is an object under the chiller.
Check that the unit is placed on an even surface.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves are out of position.
A sensor has failed.
CORAL 118 WINE COOLER
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
THE UNIT DOES NOT START
POSSIBLE CAUSE
POSSIBLE CAUSE
THE COMPRESSOR TURNS ON AND OFF FREQUENTLY
POSSIBLE CAUSE
THE FANS TURN ON AND OFF FREQUENTLY
POSSIBLE CAUSE
THE LIGHT DOES NOT WORK
POSSIBLE CAUSE
VIBRATIONS / THE UNIT IS NOISY
POSSIBLE CAUSE
THE DOOR WILL NOT CLOSE PROPERLY.
POSSIBLE CAUSE
ERROR CODE: E1 - E2 - E3 - E4 - E7 - E8
POSSIBLE CAUSE
1 6 / 4 4
PAGE
N° DOC
SOLUTION
Insert the plug.
Press power nutton to turn on the unit.
Check the breaker and/or fuses.
SOLUTION
Check the temperature control setting.
Close correctly.
Check the door gasket.
SOLUTION
Close correctly.
Check the door gasket.
SOLUTION
SOLUTION
Insert the plug.
Check the breaker and/or fuses.
SOLUTION
Position the equipment correctly.
Make sure the bottles don't touch each others.
Remove the object.
SOLUTION
Position the equipment correctly.
Close correctly.
Clean the door gasket.
Place the shelves properly.
SOLUTION
Contact us for a service call.