Member's Mark SF127B-33AI Manual Del Usuario página 5

The fireplace/heater unit comes in two distinct parts:
The fireplace unit itself, (Figure 2), and the Remote Control, (Figure 3).
Figure 2
 The Fireplace/Heater Unit
On the top right corner of the fireplace/heater unit is the control panel. This panel contains the buttons and displays to properly
operate the fireplace/heater unit. Refer to Figure 4 for placement of the control buttons.
Display Unit
Display Unit.
This segment will show information about flame level, flame speed, timer, and current Fahrenheit/Centigrade temperature.
With the heater on, gently touch and hold the heater control button
mode. Repeat the same process to convert Celsius temperature into Fahrenheit temperature.
Main Power button.
Touch the power button to turn the fireplace/heater unit on and off. Touch the power button once to turn the unit on. Touch
again to turn the unit off.
NOTE: After the heater function or power is shutoff the blower will continue to run for several minutes to cool the internal
components.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
OPERATION
Fireplace/Heater Front Panel Controls
Flame Color Adjustment
Main Power
Heater Down
Figure 4
Figure 3
Brightness Adjustment
Flame Speed
Heater Up Heater Control
for five seconds to enter temperature converting
ELECTRICAL SPECIFICATIONS
Model No. SF127B-33AI
Voltage 120 V
Frequency 60 Hz
Watts 1500 W
Timer Function
5