Setting The Power On Mode; Enabling/Disabling The Front Panel Controls; Enabling/Disabling Remote Control Wireless Transmission; Loop Out Setting - NEC PlasmaSync 42XM4 Manual Del Usuario

Setting the power on mode

This function sets the input mode and the sound volume
at the time the power is switched on.
Example: Setting the input mode to "VIDEO2"
On "OPTION3 " menu, select "PWR.ON MODE ", then
press the MENU/ENTER button.
The "PWR.ON MODE " screen appears.
On "INPUT " of "PWR.ON MODE " menu, select
"VIDEO2".
The available inputs depend on the setting of input.
PWR. ON MODE
INPUT
VOLUME
SEL. ADJ.
Information
INPUT settings
LAST: Last mode (the input that was last selected at
the time the power was switched off).
VIDEO1, 2, 3: VIDEO input mode.
RGB1, 2, 3: RGB input mode.
HD/DVD1, 2: HD/DVD input mode.
HD/DVD2, 3: DVD input mode.
MULTI: Multi screen mode.
Follow the procedure used for PROGRAM TIMER. See
page En-29.
PICTURE IN PICTURE
PWR. ON MODE
MULTI SCREEN SETTING
MULTI MODE
: BOTTOM LEFT
INPUT MODE
MAIN : HD/DVD1
SUB : VIDEO1
SEL. ADJ. EXIT RETURN
VOLUME settings
LAST: Last mode (the volume that was last selected at
the time the power was switched off).
0 to 44: The level of sound volume.

Enabling/disabling the front panel controls

This function enables/disables the front panel controls.
Example: Setting "ON"
On "CONTROL LOCK" of "OPTION3" menu, select
"ON", then press the MENU/ENTER button.
OPTION 3
PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT
REMOTE ID
ID NUMBER
VIDEO WALL
NEXT PAGE
SEL. ADJ.
Information
CONTROL LOCK settings
ON: Disables the buttons on the front panel.
OFF: Enables the buttons on the front panel.
* Even when the CONTROL LOCK is set, the POWER
switch will not be locked.
* This becomes effective when the on-screen menu goes
out.
: VIDEO2
: LAST
EXIT RETURN
SIDE BY SIDE
PWR. ON MODE
MULTI SCREEN SETTING
MULTI MODE
: SIDE BY SIDE1
INPUT MODE
LEFT : HD/DVD1
RIGHT : VIDEO1
SEL. ADJ. EXIT RETURN
3 / 4
: ON
: ON
: OFF
: ALL
: ALL
RETURN
EXIT
Enabling/disabling remote control wireless
transmission
This function enables/disables remote control wireless
transmission.
Example: Setting "OFF"
On "IR REMOTE" of "OPTION3" menu, select "OFF", then
press the MENU/ENTER button.
PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT
REMOTE ID
ID NUMBER
VIDEO WALL
NEXT PAGE
SEL.
Information
IR REMOTE settings
ON: Enables remote control wireless transmission.
OFF: Disables remote control wireless transmission.
Set "OFF" to avoid unwanted control from other remote
controls.

Loop Out setting

When this feature is set to ON, the received signal will be
looped out.
Example: Setting "ON"
On "LOOP OUT" of "OPTION3" menu, select "ON".
PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT
REMOTE ID
ID NUMBER
VIDEO WALL
NEXT PAGE
SEL.
Information
LOOP OUT settings
ON: The received signal will be looped out via PC1
terminal or VIDEO1 terminal.
OFF: The received signal will not loop out.
* Even if LOOP OUT is ON, signals won't be sent out if
POWER is being turned off.
To connect another display...
See page En-6.
If the RGB/PC1 signal is present at the time
the power switched on...
The RGB/PC1 input will be displayed regardless of the
setting of LOOP OUT.

REMOTE ID setting

Set the remote code to adapt the plasma monitor to the
remote control.
Example: Setting to "1"
On the "REMOTE ID" of "OPTION3" menu, select "1".
PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT
REMOTE ID
ID NUMBER
VIDEO WALL
NEXT PAGE
En-30
SEL.
OPTION 3 3 / 4
: OFF
: OFF
: OFF
: ALL
: ALL
ADJ. EXIT RETURN
OPTION 3 3 / 4
: OFF
: ON
: ON
: ALL
: ALL
ADJ. EXIT RETURN
OPTION 3 3 / 4
: OFF
: ON
: OFF
: 1
: ALL
ADJ. RETURN
EXIT