Other Settings - SSS Siedle CE 600-02 Manual De Instrucciones

English
Application
System-free external camera with
automatic day/night switchover (True
Day/Night) and integrated infrared
lighting. Horizontal pick-up angle:
appr. 73°–23°
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
• Please read through this product
information carefully before commis-
sioning the camera.
• Never operate the camera outside
the specified limiting temperature,
humidity or voltage values.
• When laying the connecting cable,
ensure that it is not subject to load,
kinked or damaged in any way.
The following installation situations
must be avoided without fail:
• Direct backlight
• Direct sunlight
• Extremely bright picture back-
ground
• Highly reflective walls on the
opposite side of the door station
• Lamps or direct light sources
Scope of supply
• CE 600-...
• "Easy bracket" fixture
• 4 cross-head screws 4 x 35
• 4 wall plugs 6 x 30
• 4 Allen screws M4 x 13
• Allen key size 3
• Video SUB-OUT cable
• Connecting plug
• This product information
1 Product details
a Housing
b Infrared lighting
c Lens attachment
d Mounting borehole
e Connecting cable
f Wall arm
g Mounting base
h "Easy Bracket" catch
i OSD cover
j "Easy Bracket" hook
k Cable outlet
Safety remarks
• With darkened environment and
direct view into the IR spotlight, a
safety distance of >1 m to the spot-
light must be maintained.
• Do not observe invisible LED beam
directly using optical instruments
(e.g. magnifying glass) as this can
pose a hazard to eyes, LED class 1M.
• It is prohibited to operate the IR
lamp with a faulty cover or during
repair.
• To maintain the EMC-compliant
operation of the external camera, no
changes may be made to the camera
connecting cable.
• This is a Class A device. Operating
this device/equipment may cause
radio interference in residential
areas.
Mounting
2 Fasten the "Easy Bracket" fixture
on the wall, observing the mounting
position, with the retaining bracket
at the top.
Create the plug-in connection and
suspend the hook at the camera
on the retaining bracket of the wall
fixture. Fasten the camera using 4
Allen screws.
The "Easy Bracket" fixture is not
suitable for ceiling mounting. In this
case, the mounting base is screwed
directly into the ceiling.
3 Adjust the pan and tilt angle.
4 Fix the camera setting using the
provided Allen key.

Other settings

5 Take off the OSD cover, under
which is the joystick for controlling
the settings.
To make the settings, the video
signal of the camera must be con-
nected to a monitor via the video
SUB-OUT output. The camera menu
is shown on the monitor.
Camera menu OSD
Within the menu, operation takes
place using the joystick.
Pressing the joystick opens the
camera menu.
• Scroll within the menu by moving
the joystick up/down.
• Select a function by pressing the
joystick.
• Return from a menu point by
pushing the joystick to the left.
Terminal assignment
+, – Supply voltage 20–30 V DC
L/S Coaxial connection
L = lead, S = shield
Specifications
Colour system: PAL
Image pick-up: CMOS sensor 1/2.8"
960 x 576 Pixel
Resolution: 960 TV lines
Lens: 2.7–13.5 mm
Mechanical adjustment range:
160° horizontal/178° vertical
Continuous operation: suitable
Video output: 1 Vss at 75 Ohm
Operating voltage: 20–30 V DC
Operating current: max. 485 mA
Protection system: IP 67
Ambient temperature:
–20 °C to +50 °C
Dimensions (mm) W x H x D:
75.3 x 76 x 218.5
5