Product Diagram; How To Use; Power On/Off; Brightness Control - TaoTronics TT-DL20 Guia Del Usuario

Product Diagram

① Lamp head ② LED panel
④ Lamp arm ⑤ Power port
⑦ Touch-sensitive bar ⑧ Lamp base

How to use

Use the power adapter to connect the lamp to a wall socket.

Power on/off

Double click the touch-sensitive bar.

Brightness control

Tap on the touch-sensitive bar with your nger and hold down to
increase/decrease brightness.
③ Lamp head latch (tilts up to 180°)
⑥ Arm-base latch (tilts up to 90°)
CCT adjustable
Press your nger against the lamp arm and hold down to change the
light color temperature.
Note:
1. The lamp is only for home and of ce use. To protect the touch
panel from interference, please keep the lamp away from metal,
live wires, laptop cables, anti-static rubber, etc.
2. The touch-sensitive bar and/or arm will slightly vibrate when
brightness or CCT reach max/min level.
3. Tilting latch
The tilting latch might loosen after long time use; tighten the screws
clockwise with the included wrench.
Caution
• Use only the provided AC power adapter.
• Please do not dismantle the product by yourself, always ask
professional electricians or authorized technicians for repair.
• In case of bad/strange odor or anything unusual, please turn off
the unit immediately.
• Please do not remove the power plug with wet hands as it may
cause electrical shock.
• Keep away from children.
• Do not place this unit near any heat source, moisture,
or corrosive substances.
• Clean the unit on a regular basis.
• Please store in a dry and cool place if not using for a long
period of time.
03/04