Use - Imetec N0901 Instrucciones De Uso

Ocultar thumbs Ver también para N0901:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27
on a smooth and heat resistant surface.
While straightening, be careful not to near the plates too much to
the sensitive parts of the face, ears, neck or head.
Leave the plates to cool down completely when finished, before
putting the appliance away.
WARNING! This appliance is not to be
used if it has been dropped or if there
are visible signs of damage.
WARNING! DO NOT use this appliance
near bathtubs, showers, basins or
other vessels containing water. Never
place the appliance into water.
WARNING! DO NOT spray hairspray
while the appliance is switched on.
There is a risk of fire.
PREPARING YOUR HAIR
Wash hair as normal and comb to remove knots.
Dry your hair and brush from the roots to the ends.
OPERATION
Soft Curls Covers Accessory (12)
Use the Soft Curls Covers (12) if you wish to create a softer wavy
effect.
Before inserting or removing the shells (12), make sure the
straightener is cold.
Insert the shells (12) by sliding them on the heated body (2).
INSTRUCTIONS FOR USE
Connect the plug (7) to the mains.
Press the button (9). The LED display (3) lights up.
Select the desired temperature between 150°C and 230°C,
depending on the type of hair and the desired effect; the
temperature can be adjusted at any time by pressing + or - (10).
After having selected the desired temperature, the button lock
can be activated by pressing the button (9) twice and quickly. This
function prevents accidental temperature changes while using
the straightener. The activation of the button lock is signalled by
the LED (4) going on; the lock can be deactivated by pressing the
button (9) twice once again.
The display (3) and the operating LED (5) flash until the plates
reach the set temperature.

USE

13
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido