Adjusting The Temperature; Maintenance And Cleaning - Imetec N0901 Instrucciones De Uso

• Once the temperature is reached, the LED display (3) and the
operating LED (5) remain on.
• Take a thin lock of hair, which is the same width of the plate and
not too voluminous, and place it between the two plates.
EN
• Keep the lock of hair taut with one hand and slide the plate closed
with the other hand, from the roots down to the ends.
• Once the hair is styled, switch the appliance off by keeping the
button (9) pressed and disconnect the straightener from the
socket.
NOTE: steam may appear while straightening; this is excess
humidity in the hair that evaporates.

ADJUSTING THE TEMPERATURE

The hair straightener has an electronic temperature adjustment
system. This allows the plate temperature to be adjusted according
to the type of hair and the desired style.
150-160°C: recommended for thin hair
170-190°C: recommended for medium hair
200-230°C: recommended for thick hair
It is recommended to start styling by setting the lowest temperature
and gradually increasing it according to the desired style.
During use, the external parts (2) become very hot. Be particularly
careful not to place these parts in contact with the skin or fingers
while using the straightener.
Before applying or removing the shells (12), make sure the
straightener is cold.
o n .

MAINTENANCE AND CLEANING

• Switch off the appliance by pressing the button (9) and disconnect
the plug (7) from the socket.
• Wait for the plates (11) to cool down.
• Clean the surface of the plates (11), the heated bodywork (2) and
the handle with a soft, damp cloth.
IMPORTANT! Risk of scalding
WARNING! Always disconnect the
appliance from the mains supply
before cleaning
maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.
or
14
performing