Bosch PSB 600 RE Manual De Instrucciones página 13

Maintenance and Cleaning
Before any work on the machine itself, pull the
mains plug.
For safe and proper working, always keep the
machine and the ventilation slots clean.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit order number
given on the nameplate of the machine.
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
strain relief
live = brown
neutral = blue
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this machine it must be
disposed of safely.
Environmental Protection
Recycle raw materials instead of disposing as
waste
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine. The plastic com-
ponents are labelled for categorized recycling.
Noise/Vibration Information
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the prod-
uct are: sound pressure level: 99 dB (A); sound
power level: 112 dB (A).
Wear hearing protection!
The typical weighted acceleration is 16 m/s
13 • 2 609 932 184 • 02.07
All manuals and user guides at all-guides.com
www.bosch-pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
Fax
Ireland
Beaver Distribution Ltd.
Greenhills Road
IRL-Tallaght-Dublin 24
Fax
Australia
To be fitted
Robert Bosch Australia L.t.d.
by qualified
RBAU/SPT2
professional only
1555 Centre Road
P.O. Box 66 Clayton
AUS-3168 Clayton/Victoria
Fax
www.bosch.com.au
E-Mail: CustomerSupportSPT@au.bosch.com
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
Fax
We declare under our sole responsibility that
this product is in conformity with the following
standards
EN 50 144 according to the provisions of the di-
rectives 89/336/EEC, 98/37/EC.
Dr. Gerhard Felten
Senior Vice President Engineering Head of Product Certification
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Subject to change without notice
2
.
English - 5
Service and Customer Assistance
Service
............................
Advice line
....................
.............................................
Service
...................................
....................................................
...............................................
...............................................
.....................................................
.....................................................
Declaration of Conformity
or standardization
+44 (0) 18 95 / 83 87 82
+44 (0) 18 95 / 83 87 91
+44 (0) 18 95 / 83 87 89
+353 (0)1 / 414 9400
+353 (0)1 / 459 8030
+61 (0)1 / 800 804 777
+61 (0)1 / 800 819 520
+64 (0)9 / 47 86 158
+64 (0)9 / 47 82 914
documents:
Dr. Eckerhard Strötgen