Measurement Data - Citizen CH605 Manual De Instrucciones

*Note!
• If the cuff does not stop inflating, remove the cuff at once.
• To interrupt the measurement, you may press the
START/STOP button. The cuff will deflate immediately
after a button is pressed.
e. After taking blood pressure measurement, the Systolic
rate, Diastolic rate and heart rate will be on the display for
1 minute.
f. The device switches off automatically after 1 minute.
C. Storing, recalling and erasing measurement data:
a. Storing data:
After each blood pressure measurement, the Systolic rate,
diastolic rate, heart rate and the time & date of specific day
will be automatically stored. The memory holds the latest
48 measurement data. If more than 48 measurements, the
memory will automatically clear out the earliest data.
b. Recalling data:
(1) Pressing "RECALL" button at normal time, nothing will
appear on the display if there is no data in the memory.
If there is data in the memory, the latest recorded set of
measurement which are the Systolic rate, Diastolic rate,
heart rate, including the recording time and date, will
appear and lasting on the display for 1 minute. (60 sec)
All manuals and user guides at all-guides.com
12