Publicidad
Idiomas disponibles
Idiomas disponibles
www.digisportinternational.com
INSTRUCTION MANUAL
STOPWATCH DTM60EL
FEATURES:
CHRONOGRAPH
-
Display
of
Lap,
split
chronograph.
- Measure up to 9 hours 59 minutes and 59.99
seconds.
- 60 recallable lap and split memories.
- Display of fastest (FS), slowest (SL) and
average (AV) lap times for the laps traversed
- Lap counter (00-99)
- Electro-Luminescent back lighted LCD
TIMER:
- Countdown timer, maximum 10hours.
- Automatically recycles upon completion of
countdown. And cycle counter to keep track of
cycles counted.
- 30 seconds shuttle-countdown for timeout
period timekeeping.
PACER:
- From 10 beeps/minute to 320 beeps/minute.
- Display of pacer frequency, beep counter and
total time elapsed simultaneously.
CLOCK:
- Hour, minutes, seconds, month, date, day
and year, auto
calendar.
- Alarm hour and minutes.
- 12/24 hour and European calendar user
option.
CLOCK:
1. Depress D to select CLOCK mode. The
alarm hour, alarm minutes, month, date, day,
year,
hour,
minute
and
displayed as shown.
2. Time setting can be done by means of
depressing B to select digits and A to
advance digits
Remarks: alarm is automatically armed if
alarm hour or minute has been set. Alarm can
also be armed or disarmed by depressing C at
normal time mode.
When alarm is armed 'AL' is flashing. When the
alarm time is reached and the alarm is armed,
an output of 3 short beeps/second will sound
for 15 seconds.
Remarks: if the alarm time is reached when
the stopwatch is in other modes, the alarm will
only sound 3 short beeps.
CHRONOGRAPH OPERATION:
1.
Depress D to select the operating mode.
The chrono indicator is shown. Depress A to
start.
2.
Depress B to read the 1st lap time. LAP
is shown at the upper row, SPLIT is shown at
the middle row and the RUNNING CHRONO
is shown at the bottom row.
3.
Depress B to display the 2nd lap time.
The 2 digit in dot matrix format at the top left
corner is the lap counter.
4.
Depress B to display the 3rd lap time.
5.
Depress A to stop counting.
and
running
RECALL MODE
1.
Depress C to recall 1st lap data
(memory can be recalled anytime when the
chronograph is either running or stopped)
2.
Depress C again to recall the 2nd lap
data.
3.
Depress C again to recall the 3rd lap
data.
4.
Depress C again to recall the stopped
time. At any time during the RECALL
mode....
5.
Depress A will display the average (AV)
Lap time of the Laps traversed.
6.
Depress B will display the slowest (SL)
Lap time of the laps traversed.
7.
Depress B again will display the fastest
(FS) Lap time of the laps traversed.
8.
Repeated depression of B will display
the fastest and slowest Lap times alternately.
Remarks: (1) if lap counter is > 99 or either Lap or
split is greater than 9 hours 59 min 59.99 sec, the
power of the computer has been exceeded and the
AV information will be disabled as shown.
(2) If either lap of split is greater than 9 hours 59
min 59.99 sec, the power of the computer has
been exceeded and the SL and FS information will
be disabled.
9.
Another depression of the C button will
return the chrono to the stopped status.
(Depression of D at any time during recall
mode serves the same purpose.)
seconds
are
10. Depress A to restart counting or B to
reset all memories.
Remark: Since there are only 60 memories the
chronograph will recall only the 1st 59 and the last
lap data.
11. Depress D to select the TIMER mode.
12. Depress B to select digits and A to set
digit.
13. Digits will be advanced by +1 for every
depression of A.
14. When the seconds digits are set,
depress B to complete the setting process.
The upper and middle row will show the same
preset time. The 4 digit counter at the lower
row will remain at 0000.
COUNTDOWN TIMER:
1.
Depress A to start countdown.
2.
The timer can be started or
stopped by depressing A. When the
timer approaches zero, an output of 2
short beeps/seconds will sound for
15 seconds. (push of B, C or D
buttons will stop the sound) The
counter will advance by 1 and timer
starts again immediately.
3.
When the timer is at the stopped
condition, depress C will immediately
start a 30 seconds shuttle countdown
(for timeout timekeeping), which is
displayed at the top row. At the end of
the 30 seconds a beep will be
generated and the displays will return
to the original status.
4.
Depress C while this countdown
is in progress will terminate it
immediately and the display return to
its original status.
5.
Countdown will resume when A
is depressed.
Remarks :(1) if the preset time is 29
seconds, only 2 beeps will sound on
approach
of
(2) When timer reaches zero when the
stopwatch is in other modes, only 2 beeps
will sound. If the game has a 20 minutes
period, select the timer mode and set the
countdown time to 20 minutes.
PACER:
1. Depress D to select the PACER mode.
The display will be as shown with the
last 2 digits at the lower row blinking.
2. At this status depress B will sequence
the PACER frequency as follows: 10, 20,
30,40,60,80, and 120,160,240,320.
3. Depress A to start PACER. A beeping
sound of 320 beeps/minute will sound.
The total time elapsed will be shown on
the top row, the beep counter at the
centre and PACER frequency at the
lower row. The beep counter has a
range of 9999. Depress A to stop
PACER.
Remarks: Pacer will be reset if
stopwatch is switched to another mode
zero.
Publicidad
