Device Description; Specified Conditions Of Use; Residual Risk - Gude KS 18-401-30 Manual Del Usuario

The specified vibration emission value can also be used for an introductory assessment of the exposure.
Warning The vibration emission value may differ from the specified value during the actual use of the power tool,
depending on the way the power tool is used.
Try to keep the exposure to the vibrations as low as possible. Steps to reduce vibration exposure include wearing
gloves when using the tool and limiting working hours. All parts of the operating cycle must be taken into account
(for example, times when the power tool is switched off and times when it is switched on but idling).

Device description

9
5
6
1
2
Read and understand the operating
instructions before using the
appliance. Familiarise with the control
elements and how to use the appliance properly. Abide
by all the safety measures stated in the service manual.
Act responsibly toward third parties.
The operator is responsible for accidents or risks to
third parties. Persons over 18 years of age can only
work on the appliance. An exception includes youngsters
trained in order to reach knowledge under supervision of
the trainer during occupational education.
In case of any doubts about connection and operation
refer please to our customer center
The operating personnel must have received sufficient
training in use, setup and maintenance.

Specified Conditions of Use

The battery chain saw may be used only for cutting
wood – always across the grain. Respecting technical
data and safety precautions.
Do not use this product in any other way as stated for
normal use. Not observing general regulations in force
and instructions from this manual does not make the
manufacturer liable for damages.
7 8 10
13 14 11 12
3
4
1
Trigger Release
2
On/off Button
3
Chain Drive
4
Bar Groove
5
Rear Handle
6
Battery
7
Front handle
8
Front Hand Guard / Chain brake lever
9
Chain Lubricant Cap
10
Guide Bar
11
Saw Chain
12
Guide Bar Cover
13
Chain tensioner wheel
14
Chain Catcher
Requirements for operating staff
The operating staff must carefully read the Operating In-
structions before using the appliance.
Qualification: Apart from the detailed instructions
by a professional, no special qualification is necessary
for appliance using.
Minimum age: Persons over 18 years of age can only
work on the appliance. An exception includes youngsters
trained in order to reach knowledge under supervision of
the trainer during occupational education.
Training: Using the appliance only requires correspon-
ding training by a professional or the Operating Instruc-
tions. No special training is necessary.
The operator is responsible for accidents or risks to third
parties.
Observe to keep out of dangerous zone

Residual Risk

Risk of injury
Contact with the saw chain can cause casualties.
Never touch moving chain by hands.
Danger of kickback !
Kickback can lead to casualties.
Danger of burns!
Chain and guiding groove warm up in operation.
ENGLISH
27