Steren CCTV-906 Manual Del Usuario página 7

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

9.- Camera 1, Camera 2, Camera 3, Camera 4
Allows you to view camera 1, 2, 3, or four respectively
10.- PB
Access to the record / playback VCR
CONNECTIONS
1. Locate the BNC inputs on the rear panel of the multiplexer.
2. Connect camera 1 to the input jack labeled as "CAM1". Do the same
for cameras 2, 3, and 4.
3. Connect a monitor in the jack labeled as "MONITOR OUT" with a
BNC connector.
4.- To use a VCR for playback, plug in "VCR IN" input.
5 .- In case of record on a VCR connect to the VCR OUT output.
6. Connect the power jack to the power input and the other end to the
electrical power source.
ENGLISH-07

Publicidad

Tabla de contenido
loading

Tabla de contenido