Daitsu DS-18UIAK Manual Del Usuario página 38

Ocultar thumbs Ver también para DS-18UIAK:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
Troubleshooting
Phenomenon
The unit can not be started up :
Breaking off
Cooling/Heating effect is poor :
Remote controller is not available :
Water leakage of indoor unit :
Water leakage of outdoor unit :
Noise from indoor unit :
Troubleshooting
Is the power cut off?
Is the power plug loose? (If applicable )
Is the circuit protection device tripped off?
Is voltage higher or lower?
(Tested by professionals)
Is the TIMER correctly used?
Is temperature setting appropriate?
s I
the
inlet or outlet blocked?
filter dirty?
Is
the
Is the window or the door open?
Is low fan speed set?
Are there heat sources in the room?
Check if there is magnetic or electrical interference
near the unit that may affecting operation of
the controller. In this case, pull the plug out and
reinsert it.
Is the remote controller within its operating range
or obstructed? Check the condition of the
batteries and replace them if necessary.
Check if the remote controller is damaged.
The humidity is high.
Condensate overflows.
Drain hose is loose.
During cooling operation, condensate is
generated around the pipes and connection
During defrosting operation, the thaw water flows
out.
During heating operation, the water on the heat
exchanger drips out.
The noise emitted when the fan or compressor
relay is switching on or off.
When the defrosting operation is started or stopped,
there is a sound of refrigerant flowing in the
reverse direction.
- 16 -
joints.

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Dos-18uiak

Tabla de contenido