Operating Instructions; Setting Thickness Height; Start / Stop Sanding Belt; Setting The Conveyor Belt Speed / Feed - HOLZMANN MASCHINEN R 455B Instrucciones De Servicio

14 OPERATION
Operate the machine only in perfect condition. Before each use, a visual inspection of the
machine must be carried out. Safety devices, electrical cables and controls must be inspected
carefully. Check screw connections for damage and tightness.
14.1

Operating Instructions

Perform all conversion work only separation from the mains by!

14.1.1 Setting thickness height

The clearance height is adjusted using the hand wheel height adjustment.
The adjusted height can be read on the display.
14.2

Start / Stop Sanding belt

Start: Press the green button ˝I˝
Stop: Press the red button ˝O˝

14.2.1 Setting the conveyor belt speed / feed

14.3

Start / Stop conveyor belt

NOTE: Starting is only possible by function of Sanding belt
Starten: Switch the ON / OFF button to ON
Stoppen: Switch the ON / OFF button to OFF
HOLZMANN Maschinen Austria www.holzmann-maschinen.at
WARNING
Conveyor speed
feed regulator
ON / OFF switch
Förderband
Breitbandschleifmaschine / wide belt sander R 455B / Lijadora de cinta ancha
OPERATION
Página 27