Dimmer Function - Techno Line WS 6820 Manual Del Usuario

Snooze alarm
When time reaches the set alarm 1 or alarm 2 time, the clock will beep with blinking ALM 1 or ALM 2
LED. Press SNOOZE button once, the alarm sound will stop and ALM 1 or ALM 2 LED keeps blinking.
Alarm will sound again in 5 minutes.
Set snooze duration (from 5 to 60 minutes)
Press and hold SNOOZE button and time display will show 05 (default snooze duration). Then press
MIN button to set the desired snooze duration.
Stop the alarm
When time reaches the set alarm 1 or alarm 2 time, the clock will beep with blinking ALM 1 or ALM 2
LED. Press ALM 1 or ALM 2 button, the alarm sound will stop and ALM 1 or ALM 2 LED becomes
static. The alarm will beep again same time next day.
WEATHER FORECAST AND BAROMETER
The weather station has a built-in barometer which measures the barometric pressure. After power up,
the display shows Sunny & Cloudy icon. The weather station takes around 24 hours to gather data of
barometric pressure changes and predicts next 12 – 24 hours weather conditions.
Note: The weather station predicts next 12 – 24 hours weather conditions. It may not match with the
current weather condition outside.
There are four types of weather icons for predicted weather condition:
Note: Moving the weather station around your house or building will affect its accuracy because the
sudden change of temperature or height/ attitude will affect the accuracy of the weather station. It will
take 24 hours to get stable again to predict next 12 – 24 hours weather conditions.
TROUBLE SHOOTING
Press RESET button of the weather station and then press RESET button of the outdoor transmitter.
The weather station will be reset to default settings and needs to be updated by DCF-time-signal
again.
Losing the outdoor temperature
When the outdoor temperature digits show "—", the wireless transmission is either interrupted or lost.
Press MINUTE button of the weather station, then press RESET button of the outdoor transmitter. If
the weather station continues to lose the outdoor temperature display, try placing the outdoor
transmitter in a different location until you have smooth transmission of temperature data.

DIMMER FUNCTION

Press SNOOZE/ DIMMER button to adjust high or low brightness of the LED display.