Assembly Steps - Primus THRÓNOS101T Guía De Montaje Rápido

11
Armrests
13
Plastic screw cap cover (3)

2. Assembly steps

Step Description
1 Start by attaching the five wheels into
chair base. Simply press the stud
firmly into the hole on the bottom of
the base.
12
M8 washer (18)
14
Allen wrench
Image
Step Description
Mount the gas lift and its cover into the top
of the chair base by placing the larger end
into the hole in the center.
2 Attach the seat back to the seat cushion
using four M8x20mm allen-head screws
and four sets of washers to fasten both
parts together.
Tighten the screws to firmly secure the
seat assembly.
Proceed to attach the mechanical base
3
to the seat assembly using the supplied
four M8x30mm allen-head screws and
another four sets of washers.
Next, use another set of eight
M8x30mm allen-head screws and the
remaining washers to fix the armrests to
the seat assembly, as illustrated in the
figure on the right.
Image