Publicidad
Idiomas disponibles
Idiomas disponibles
EMERGENCY
OPENING
OPENING THE LOCK
Press
Enter the set code
Press
After 5/6 seconds turn or pull the
handle and open the door
CLOSING THE LOCK
Close the door, turn the handle and
press
Press
CHANGING OPENING CODE
The door and the lock must be open, the bolts expanded (out)
Press
Press
and wait 5 seconds
Press
Enter the opening code already set
Press
and
Enter the new code
Press
Enter the new code again
Press
PARTICULAR SIGNALS
Wrong operation / code
Exhausted battery
EMERGENCY OPENING
If the battery is completely exhausted, the contacts has oxidised or hasn't
been used for a long time, it is possible to open the lock by powering it from
the outside.
Place a battery (rectangular 9V alkaline type) on the round contacts on the
keyboard, open the lock and substitute the battery inside.
IMPORTANT: do not detach the battery until the lock is fully opened
(wait for the four beeps signalling "OK opened").
BORDOGNA CASSEFORTI · Viale Europa, 37 - 25036 Palazzolo sull'Oglio (BS) - ITALY · Tel. +39 030 7406011 · Fax + 39 030 7401649 · email: info@bordogna.com · www.bordogna.com
85.012.173 - rev. 02/16
All manuals and user guides at all-guides.com
When an invalid code is entered for the third consecutive time, the lock blocks for two minutes leaving the red LED on
Right code
Wrong code
Right code
Wrong code
Right operation
Wrong operation
(not set code)
ELECTRONIC LOCK BMZ66-C1T-VERDE
Powered by a rectangular 9v alkaline battery (not supplied)
The battery must be placed in the black box positioned inside the door
You have a maximum of 10 seconds for each key entry
The lock is provided with the following factory code: 204060
Ensure that you only program the lock when the door is open
After changing the code always try the code several times with the door open
The lock has Time Delay. Long Time Delays imply higher battery consumption
Caution! Don't forget your code, the lock can not be used anymore
Please keep your instructions in a safe place together with the guarantee
OPENING WITH SET TIME DELAY
Press
Enter the set code
Press
The Time Delay starts
The opening window starts
Enter the code again
Press
After 5/6 seconds turn or pull the
handle and open the door
SETTING THE TIME DELAY
The door and the lock must be open
Time Delay: the time between the first and second code entry in minutes
Opening window: the period of time in minutes during which the code can be entered a second time
and the lock can be opened
Press
Press
Enter a 3-digit code of which:
•
The first 2 digits define the Time Delay in
minutes (from 00 to 99)
•
The third digit defines the Opening Window in
minutes (from 1 to 9)
Press
Enter the 3 digits again
Press
PARTICULAR CASES
THE LOCK DOEs NOT OPEN
•
The lock does not emit any audible tone at all: the battery is exhausted.
Open the lock following the procedure "Emergency opening".
•
The lock emits 4 beeps that mean "OK opened" but fails to open completely,
and if other keys are pressed an error signal is emitted: press
closes again or the lock re-closes and reopens immediately and you can
repeat the opening procedure.
THE LOCK DOEs NOT CLOsE
•
Pressing the key
the lock remains open, emits four beeps and the
electronics remain on: check if the handle is properly turned and press
.
•
Pressing the key
an error signal is emitted: repeat the opening and
closing procedure.
USER MANUAL
72.010.209
Main instructions
Unique variable 6-10 numbers/letters code
Temperature of use: from 0° to 50° C
Right code
Wrong code
every 2 seconds
Right code
Wrong code
For example 17 minutes Time Delay and 8 minutes
Opening Window:
Right operation
Wrong operation
For example:
Right operation
Wrong operation
, the lock
Publicidad
