TM
TouchLock
TouchLock is a compact smart lock that allows users to lock valuable items with
just a fingerprint! There is no need for complex combinations or keys, any
authorized person's fingerprint can open the lock. The lock can store up to 20
fingerprint records.
Hook
LED
Sensor
Charging port
Fingerprint Enrollment
Out of the box or after all fingerprints have been erased, the lock is ready for
initial fingerprint enrolment.
Red and blue light flash
Press hook once, you
Touch the sensor 3 times for 3
will see a blue and red
successful scans (you will see a
light.
blue light for 2 seconds).
*If a red light flashes, please
try again.
All manuals and user guides at all-guides.com
Power
Press the hook once to power up.
Note:
If the LED does not light up, you may
need to re-charge via the micro-USB
charging port
If there is no action done to the lock
after 15 seconds, the power will go
off.
Waiting for Blue
light to touch
Blue light for 4 sec
A blue light for 4
seconds indicates
completion.
*Be sure to lie finger
flat to get an
accurate scan.
Unlock
Blue light flash
Press hook once until blue
Touch sensor with an
light flashes
enrolled finger and hold;
you will see a blue light flash
for 2 seconds. *If red light
flashes, please try again.
Add Additional Fingerprints
6 sec
Blue light flash
To enroll additional
Touch the sensor with a
fingerprints: Press hook for
previously enrolled finger;
6 seconds; a blue light will
you will see a blue light flash
flash rapidly.
for 2 seconds. *if a red light
flashes, please try again.
Waiting for Blue
light to touch
TouchLock will then unlock.
*Refer to "Fingerprint
Enrollment" section
Waiting for Blue
light to touch
Red and blue light
flash
When a red and blue light
flashes, you can begin to
enroll a new finger.