Ice Maker; Refrigerator Features; Refrigerator Shelves; Crisper And Crisper Cover - KENMORE ELITE 596.7759 800 Manual De Uso Y Cuidado

Ice Maker

(on some models)
Turning the Ice Maker On/Off
To turn the ice maker ON, simply lower the wire shutoff arm.
To manually turn the ice maker OFF, lift the wire shutoff arm to the
OFF (arm up) position and listen for the click.
NOTE: Your ice maker has an automatic shutoff. As ice is made,
the ice cubes will fill the ice storage bin and the ice cubes will
raise the wire shutoff arm to the OFF (arm up) position. Do not
force the wire shutoff arm up or down.
Ice Production Rate
The ice maker should produce a complete batch of ice
approximately every 3 hours.
To increase ice production, lower the freezer and refrigerator
temperature. See "Using the Controls." Wait 24 hours
between adjustments.
Remember
Allow 24 hours to produce the first batch of ice. Discard the
first three batches of ice produced.
The quality of your ice will be only as good as the quality of
the water supplied to your ice maker. Avoid connecting the
ice maker to a softened water supply. Water softener
chemicals (such as salt) can damage parts of the ice maker
and lead to poor quality ice. If a softened water supply cannot
be avoided, make sure the water softener is operating
properly and is well maintained.
Do not store anything on top of the ice maker or in the ice
storage bin.

REFRIGERATOR FEATURES

Your model may have some or all of these features.
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
For your protection, tempered glass is designed to shatter
into many small, pebble-size pieces. This is normal. Glass
shelves and covers are heavy. Use special care when
removing them to avoid impact from dropping.
All manuals and user guides at all-guides.com
The shelves in your refrigerator are adjustable to meet your
individual storage needs.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will make
finding the exact item you want easier. It will also reduce the
amount of time the refrigerator door is open, and save energy.
To remove and replace a shelf/shelf frame:
1. Remove the shelf/frame by tilting it up at the front and lifting it
2. Replace the shelf/frame by guiding the rear shelf hooks into
3. Lower the front of the shelf and make sure that the shelf is in
To remove and replace the crisper(s):
1. Slide crisper(s) straight out to the stop. Lift the front of the
2. Replace the crisper(s) by sliding back in fully past the drawer
To remove the crisper(s) cover:
1. Remove crisper(s).
2. Holding the glass insert firmly with one hand, press up in
3. Lift the cover frame up and remove it.
To replace crisper(s) cover:
1. Fit back of cover frame into supports on side walls of the
2. Slide rear of glass insert into cover frame and lower front into

Refrigerator Shelves

Shelves and Shelf Frames
out of the shelf supports.
the shelf supports. Tilt the front of the shelf up until rear shelf
hooks drop into the shelf supports.
position.

Crisper and Crisper Cover

crisper(s) and slide out the rest of the way.
stop.
center of glass insert until it rises above the plastic frame.
Gently, slide the glass insert forward to remove.
refrigerator and lower the front of the cover frame into place.
place.
13