Safety Instructions - Moulinex OptiPro Manual Del Usuario

Thank you for choosing an appliance from
the MOULINEX range, which is intended
exclusively for the preparation of food and is
only for domestic use.
DESCRIPTION
A Motor unit
B Start button for normal speed
C Start button for turbo-speed
D Speed control
E Accessory release button
F Liquidiser attachment
G Adapter fitting for whisk
H Whisk
I Jug, 1.5 l
J Mini-chopper
J1 Chopper bowl
J2 Cover
J3 Blade
K Wall bracket

SAFETY INSTRUCTIONS

Read the instructions carefully before
using your appliance for the first time.This
product has been designed for domestic
use only.Any commercial use, inappropria-
te use or failure to comply with the instruc-
tions,the manufacturer accepts no respon-
sibility and the guarantee will not apply.
Children or disabled persons must be
supervised at all times when using this
appliance; do not leave the appliance or
supply cable within their reach.
Check that the supply voltage shown on the
rating plate of the appliance does, in fact,
match that of your electrical system. Any
connection fault invalidates the guarantee.
• Do not touch the moving parts
Never handle the blade of the liquidiser
attachment when the appliance is plug-
All manuals and user guides at all-guides.com
1
(according to model)
2
.
GB/US
e n g l i s h
ged in. Never operate the liquidiser
attachment without using ingredients.
Always handle the blade of the mini-chop-
per by its shaft.
• Always disconnect the appliance
before any operation
assembly or cleaning.
• Never dismantle the appliance.
Apart from the usual care and cleaning,
the appliance requires no maintenance
on your part.
If the supply cable or the plug is damaged,
do not use the appliance.To avoid any risk,
these must be replaced by an approved
Moulinex service centre (see list in the
"Moulinex service"booklet).
In the interests of safety, use only the
appropriate Moulinex accessories and
spare parts for your appliance.
The cord is already fitted with a plug incor-
porating an appropriate fuse. If the plug
does not fit your mains socket, see para-
graph below.
Should you need to replace the fuse in the
plug supplied, an appropriately rated,
approved BS 1362 fuse must be used (refer
to wiring instructions for fuse rating). If the
plug supplied does not fit your mains soc-
ket, it should be removed from the mains
cord and disposed of safely. The flexible
cord insulation should be stripped back as
appropriate and a suitable alternative plug
fitted. If the plug has external access to the
fuse (non rewirable type plug) please note
that the fuse cover is an important part of
the plug. Please ensure that it is always
refitted correctly. If you lose this cover,
please do not use the plug. You may
contact a Moulinex authorised service
dealer.
3
:assembly,dis-