Parts And Functions - Subzero BASE-2 Manual Del Usuario

PARTS AND FUNCTIONS

1. MICROPHONE/INSTRUMENT LINE INPUT
Combination XLR / TRS input, connect
microphone or instrument to this input.
2. GAIN KNOB
Controls the input volume from your
microphone or instrument, the clip light
indicates if you have clipped the signal.
3. INS BUTTON
Switching between low impedance for
microphone input or high impedance for guitar /
instrument input.
4. +48V BUTTON
Enables +48v phantom power for condenser
microphones.
5. MONITOR SWITCH
Selects the type of audio received when
monitoring using the headphone output of the
interface, stereo, mono or off.
6. MASTER KNOB
Allow easy control of the master output volume.
2
GAIN 1
GAIN 1
CLIP
CLIP
MIC 1 INS 1 MIC 2
MIC 1 INS 1 MIC 2
1 3
LEFT OUT RIGHT OUT
LEFT OUT RIGHT OUT
9
5
MONITOR
MONITOR
GAIN 2
GAIN 2
CLIP
CLIP
INS 2 +48V
INS 2 +48V
4
7. HEADPHONE GAIN KNOB
Controls the headphone volume output.
8. HEADPHONE OUTPUT
1/4" TRS Output to connect with your
headphones.
9. LEFT OUT / RIGHT OUT
Balanced XLR Outputs to connect to studio
monitors, amplifier or external mixing desk.
AI 2
AI 2
10. LOCK CONNECTOR
Connect a laptop lock connector to prevent the
unit from being stolen
11. USB CONNECTION PORT
Connects your interface to your computer with
supplied USB Cable.
5
6 7
GAIN 1
GAIN 1
MASTER
MASTER
8
10
11
EN