Minimum System Requirements - Subzero BASE-2 Manual Del Usuario

INSTALLATION
Simply connect to your SubZero SZ-AI2 2x2 USB
Audio Interface via an available USB 2.0 port.
There is no need for external power as this
unit draws its power from the USB port. After
the connection of the interface, the operating
system automatically detects it as a new hardware
device. Modern operating systems like Windows
Vista/7/8/10 or Mac OS X usually detect the
hardware directly and installs the correct USB
audio drivers automatically.
You can use the SZ-AI2 now in typical consumer
audio applications that do not need special
professional ASIO driver support. For example, this
could include Windows programs used for DVD
playback or more simple DJ applications that don't
require ASIO.
The SubZero SZ-AI2 2 Channel Audio Interface
is a high-resolution device capable of advanced
processing of audio content. It is built to have
low-CPU resource needs, but the unit will perform
better on a system with higher specification. For
more information on this, see minimum system
requirements below.
Connect the SubZero SZC-300 Condenser
Microphone to the SubZero SZ-AI2 2x2 USB Audio
Interface via the included XLR cable to the Mic 1
or Mic 2 input. Please ensure the +48V is enabled
as the SZC-300 condenser microphone requires
phantom power to function correctly.
We recommend switching between low impedance
for microphones or high impedance for guitar/
instruments thanks to the INS 1 or INS 2 knobs.

MINIMUM SYSTEM REQUIREMENTS

PC - Windows Vista / 7 / 8 / 8.1 or 1 0 (32 or 64 bit)
with 1 available USB 2.0 port.
MAC - Mac OSX 1 0.7 or Higher with I available USB
2.0 port
DRIVER AND SOFTWARE INSTALLATION
(WINDOWS)
This text explains how to install the SubZero SZ-
A12 under Windows 10. If you use Windows Vista,
Windows 7, Windows 8 or Windows 8.1, the steps
are basically the same. Make sure to install the
driver before connecting the interface. You can find
the drivers on the Gear4music website.
6
EN