Explore Scientific RDP1002 Manual Del Usuario página 9

1. Press and hold [
setting.
2. Press [ ] button several times until the display
shows the time offset "Zone 00"
3. Press the [
[ ] button to decrease the Time zone offset.
°C/°F SETTING
1. Press and hold [
setting.
2. Press [ ] button several times until the display
shows °C/°F.
3. Press the [ ] or [
Celsius (°C) / Fahrenheit (°F).
ALARM
SETTING/ADJUSTING DUAL ALARM TIME
You can set one alarm time for weekdays, (Monday
to Friday / 1-5) and one alarm time for the weekend
(Saturday to Sunday / 6-7).
Alarm 1 = Weekday alarm (1-5)
Alarm 2 = Weekend alarm (6-7)
] button, enter time and date
] button to increase or
] button, enter time and date
] button to switch
1. Press and hold [ ] button, enter alarm setting.
2. Sequence of setting: Alarm 1 (1-5) weekday hour 
weekday minute  Alarm 2 (6-7) weekend hour 
weekend minute  exit
3. During setting, the setting parameter will flash.
4. Press [ ] button once to increase by 1 or press
[ ] once to decrease by 1. Alternatively press
and hold the [
rapidly.
5. Press [ ] button to confirm setting and enter to next
parameter.
6. Press [ ] button to turn on/off alarm.
7. The alarm will sound when the alarm setting is finished
and turned on.
8. If there is no action in 20 seconds, the setting will be
saved and will exit the setting mode.
TURN ON/OFF ALARM
1. Press the [ ] button once to turn on/off the
alarm that is nearest in time. (1-5) or (6-7) will flash
to indicate which alarm was activated.
How to activate alarm times individually:
] button to change the figures
EN
IT
DE
FR
ES
9