Basic Operations
All manuals and user guides at all-guides.com
Recording a video clip
1. Adjust the focus:
Normally the camcorder can auto focus without adjusting focus. If you want to take close-
up pictures, you can push the Up button to switch to Macro mode (
2. Zooming:
Move the Zoom button up or down to zoom in or zoom out the screen.
3. Press the Record button to start recording.
4. Press the Record button again to stop recording.
The zoom function is also available during recording (except in macro mode).
During recording, you can capture images with the video resolution you set by
pressing the Joystick switch. The image you captured will appear the same
resolution as the one you set for video recording except in 1080P resolution
mode.
The camcorder has built-in electronic stabilizer, which can only be activated
in HD 720P(60f) / WVGA(60f). In HD 1080P(30f) / HD 720P(30f) mode, this
function is disabled.
It's normal that the camcorder will feel slightly warm with continuous use /
recording due to its high performance.
AF lock
When recording in one spot without zooming in / zooming
out or moving around, you can activate the AF lock function
by moving the Joystick right. To disable this function, move
the Joystick right again.
Recording a voice clip
1. Power on the camcorder.
2. Press the MODE key to enter the MODE menu.
3. Use the Joystick switch to select the Voice Recorder mode and press OK to enter the
menu screen.
4. Press the Record button to start recording
5. Press the Record button again to stop recording.
4 4
).
AF lock switch