Streaks - Jacobsen AR522 Serie Manual De Seguridad, Funcionamiento Y Mantenimiento

10 QUALITY OF CUT

10.6 STREAKS ________________________________________________________________

NOTE: Arrow indicates direction of travel.
Probable Cause
Damaged blade(s).
Turning too aggressively. Cutting units don't overlap during turns
or on side hills.
Tire mats down grass before it is cut.
Wet grass is matted down before it is cut.
54
A streak is a line of uncut grass. This is usually caused by
a damaged blade.
TN0224
Replace blade(s).
Turn less aggressively to allow cutting units to overlap. Change
mowing direction or pattern on side hills.
Check/adjust tire inflation pressure.
Cut when grass is dry.
Remedy